Parameters of Adec LSH series standard linear slide rails:
1. With automatic, mental ability
The X-shaped (45 ° - 45 °) arc-shaped wave channel groove is designed in front to make it have the ability of automatic centering. Even if there is a little error in the installation surface, it can also be absorbed by the slide block to maintain high-precision, smooth and stable straight-line movement.
2. Design of high rigidity and four direction equal load
Four rows of steel balls and raceway 45 are used. With the contact angle design, the steel ball can reach the ideal two-point contact, and can bear the positive and negative forces from the radial and lateral directions. If necessary, the steel ball can also be applied with preload to increase the rigidity.
3. It has interchangeability
Due to the strict control of production and manufacturing accuracy, the dimensional accuracy can be maintained within a stable tolerance range, and the slider has cage design to prevent the steel ball from falling off. Therefore, when assembling the interchangeable type line rail, the slider can be arbitrarily assembled on the same type of slide rail, and its smoothness, preloading and precision can be maintained.
Installation instructions
1. Allowable error of installation surface
LSH series is a two-point contact linear slide rail with the characteristics of automatic centering, which can absorb some errors of the mounting surface without affecting the smoothness of linear motion. The allowable errors of the installation surface are indicated in the following table:
2. Datum plane height
In order to ensure the precise combination of linear slide rail and assembly parts, the fillet should not exceed the recommended size. Please refer to the table below for the specification and shoulder height.
3. Recommended installation torque of slide rail end wire
1. With automatic, mental ability
The X-shaped (45 ° - 45 °) arc-shaped wave channel groove is designed in front to make it have the ability of automatic centering. Even if there is a little error in the installation surface, it can also be absorbed by the slide block to maintain high-precision, smooth and stable straight-line movement.
2. Design of high rigidity and four direction equal load
Four rows of steel balls and raceway 45 are used. With the contact angle design, the steel ball can reach the ideal two-point contact, and can bear the positive and negative forces from the radial and lateral directions. If necessary, the steel ball can also be applied with preload to increase the rigidity.
3. It has interchangeability
Due to the strict control of production and manufacturing accuracy, the dimensional accuracy can be maintained within a stable tolerance range, and the slider has cage design to prevent the steel ball from falling off. Therefore, when assembling the interchangeable type line rail, the slider can be arbitrarily assembled on the same type of slide rail, and its smoothness, preloading and precision can be maintained.
Installation instructions
1. Allowable error of installation surface
LSH series is a two-point contact linear slide rail with the characteristics of automatic centering, which can absorb some errors of the mounting surface without affecting the smoothness of linear motion. The allowable errors of the installation surface are indicated in the following table:
2. Datum plane height
In order to ensure the precise combination of linear slide rail and assembly parts, the fillet should not exceed the recommended size. Please refer to the table below for the specification and shoulder height.
3. Recommended installation torque of slide rail end wire